Delta 17T Serie Manual Para Los Propietarios
Ocultar thumbs Ver también para 17T Serie:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Write purchased model number here.
Table of Contents:
Warranties ................................................................................. Page 2
Installation Instructions .............................................................   P ages 3 - 7
Clean and care........................................................................... Page 8
Maintenance ..............................................................................   P age 8
Cartridge Summary Reference Sheet .......................................   P age 8
To order replacement parts, visit www.deltafaucet.com
CAUTION: This system/device must be set by the
installer to ensure safe, maximum temperature.
Any change in the setting may raise the discharge
temperature above the limit considered safe and
may lead to hot water burns.
NOTICE TO INSTALLER: CAUTION!–As the
installer of this valve, it is your responsibility
to properly INSTALL and ADJUST this valve
per the instructions given. This valve does
not automatically adjust for inlet temperature
changes, therefore, someone must make the
necessary temperature knob adjustments at
the time of installation and further adjustments
may be necessary due to seasonal water
temperature change. YOU MUST inform the
owner/user of this requirement by following the
instructions. If you or the owner/user are unsure
how to properly make these adjustments please
refer to page 7 and if still uncertain, call us at
1-800-345-DELTA.
After installation and adjustment, you must affix
your name, company name and the date you
adjusted the temperature knob to the caution
10/20/2020
You May Need
label provided and apply or attach the label to
the back side of the closest cabinet door and
the warning label to the water heater. Leave
this Instruction Sheet for the owner's/user's
reference. WARNING: This pressure balanced
or thermostatic bath valve is designed
to minimize the effects of outlet water
temperature changes due to inlet pressure
changes, commonly caused by dishwashers,
washing machines, toilets and the like. It may
not provide protection from hot water burns
when there is a failure of other temperature
controlling devices elsewhere in the plumbing
system, if the temperature knob is not properly
set or if the hot water temperature is changed
after the settings are made or if the water inlet
changes due to seasonal changes. WARNING:
Do not install a shut-off device on either outlet
of this valve. When this type of device shuts
off the water flow, it can defeat the ability of
the valve to balance the hot and cold water
pressures.
1
®
MultiChoice
Installation Instructions
Owners Manual
17T Series
Valve Trim
X00107530
107530 Rev. C
Tabla de contenido
loading

Resumen de contenidos para Delta 17T Serie

  • Página 9: Usted Puede Necesitar

    ADVERTENCIA: No instale un aparato de corte Página 7 y si todavía no está seguro, llámenos al o cierre en cualquiera de las tomas de esta 1-800-345-DELTA. válvula. Cuando este tipo de aparato cierra el flujo de agua, puede hacer fallar la habilidad de Después de hacer la instalación y el ajuste, usted...
  • Página 10: Garantia Limitada De Delta Hdf

    Piezas electrónicas. Las piezas electrónicas (excepto las pilas), si las hay, de las llaves de agua Delta® compradas de deltafaucet.com o vendedores autorizados por Delta están garantizadas al consumidor comprador original de estar libres de defectos en material y fabricación durante cinco (5) años a partir de la fecha de compra o para los consumidores comerciales, por un (1) año a partir de la fecha de compra.
  • Página 11: Instalación Del Cartucho

    Instalación del Cartucho Cierre los suministros de agua. Retire la tuerca tapa Gire el cartucho (1) de manera que la palabra “UP” (1) y la tapa de prueba (2) del cuerpo. Coloque un (2) aparezca en la parte superior. La “H” debe balde o recipiente pequeño en la parte del frente del estar en el lado caliente y la “C”...
  • Página 12: Instalación De La Cabeza De La Regadera Y El Surtidor De La Bañera

    Instalación de la Cabeza de la Regadera y el Surtidor de la Bañera INSTALACIÓN DE LA REGADERA / DUCHA: Aplique cinta para plomero a las roscas en ambos extremos del brazo de la regadera (1). Para prevenir daño al acabado del brazo de la regadera, inserte el extremo de la pared del brazo de la regadera en la brida de ésta (2) antes de enroscar el brazo en la conexión a la tubería interior.
  • Página 13: Instalación Final

    O. Nota: Ajuste para paredes de hasta 1" de espesor. Para la instalación en pared gruesa, visite el sitio web de delta faucet, verifique "ver especificaciones técnicas" de los modelos que ha comprado, pida el juego de instalación en pared de espesor adecuado...
  • Página 14 Instalación y Ajuste del Pomo de Temperatura El no hacerlo puede causar lesión. A: ¡Ajuste el tope del límite de temperatura! control de la temperatura (1) donde tropieza con Abra los suministros de agua; DEJE QUE CORRA EL el tope del límite rotacional (4) en la manija del AGUA CALIENTE Y FRÍA TOTALMENTE ABIERTA control de volumen.
  • Página 15 Instalación del mango de temperatura Abra los suministros de agua; DEJE CORRER EL AGUA TANTO EN CALIENTE COMPLETO COMO EN FRÍO COMPLETO PARA ASEGURARSE DE QUE EL AGUA CORRA DE MANERA TAN CALIENTE / FRÍA COMO POSIBLE. Coloque el mango de temperatura (1) en la lengüeta, luego gírelo hasta que alcance la temperatura máxima deseada desde la salida (de no más de 120º...
  • Página 16: Limpieza Y Cuidado De Su Llave

    Limpieza y Cuidado de su Llave ADVERTENCIA! No se puede usar Tenga cuidado al ir a limpiar este producto. ¡ Aunque su acabado es sumamente durable, SCRUBBING BUBBLES® BATHROOM puede ser afectado por agentes de limpieza CLEANER o LYSOL® BASIN TUB AND TILE o para pulir abrasivos.

Tabla de contenido