Norms And Installation - GIERRE BRIO VER Instrucciones Para La Instalación, El Uso Y El Mantenimiento

GB
1.2 Handling, transportation and
unloading
The packaging of the appliance is produced by the
company according to the agreements signed
case by case, to on the country the appliance is
being sent to, or to the means of transport used.
Once the appliance is installed, packaging can be
reused or disposed according to the regulations in
force in each country.
Ovens must be carried with their original
packaging as close as possible to the installation
site.
Only specialized personnel can lift or handle the
oven or any accessories carried independently.
Material sent is checked thoroughly before being
handed over to the forwarding agent.
Make sure that the appliance has not been
damaged during the delivery and that the
packaging has not been damaged and some
contents removed.
In case of damaged products, or missing
components, immediately contact the carrier and
the manufacturer
evidence.
WARNING!
Please check the supplied material
matches order specifications. Don't
drag or incline the oven for any reason.
The oven is to be lifted up
perpendicularly to the floor, moved in
a horizontal direction and then laid
down perpendicularly to the floor.
WARNING!
It is recommended not to install the
oven on a slippery floor.
providing photographic
1.3 Norm and installation
General norms
The establishment where the appliance is to be
installed must be well ventilated.
The installation or reparation of the appliance must
be done only by specialized personnel.
The appliance should be placed on a FLAT SURFACE.
Any possible support structures should be capable
of adequately supporting the weight of the
appliance.
By using the adjustable legs,make sure the
appliance rests perfectly level.
The back panel of the appliance must not be placed
against the wall of the establishment, but must be
placed at a distance of at least 10 cm.
In case of oven with humidification, permanently
connect the appliance to the water distribution
system. Do not use a set of separable couplings.
Important
Before carrying out any installation, maintenance or
cleaning operation, it is absolutely necessary to
disconnect the appliance from the electrical supply.
Ovens comply with the provisions and safety
requirements indicated in the following European
Directives and their specific associated standards:
2006/42/CE
•directive
subsequent updates;
•low voltage safety directives
subsequent updates (Standard
EN60335-2-42
2004/108/CE
•directive
compatibility and subsequent updates (Standard
EN50165 EN55014, EN55014-1, EN50366 ,
EN61000 series).
According to
Manufacturer declares that its products comply with
the European legislation in force and, consequently,
feature regulation CE marking enabling them to be
sold in European countries.
The functional components of the oven have a noise
emission level of less than
16
on machinery
2006/95/CE
EN60335-1
);
on electromagnetic
the previous dire
70 dB(A).
and
and
,
e
tives, the