Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2
Safety instructions
2.1
Precondition for use
This device left the factory in good working condition. In order to maintain this status and to ensure safe operation of the
device, observe these instructions and all the specifications relevant to safety.
Observe the information and symbols on the device. Do not remove any information or symbols from the device. Always
keep the information and symbols in a completely legible state.
2.1.1
Other certificates
Figure 2-1
Chinese Manufacturing Certificate
2.1.2
Warning symbols on the device
Symbol
Explanation
Consult operating instructions
2.1.3
Laws and directives
Observe the test certification, provisions and laws applicable in your country during connection, assembly and operation.
These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
● IEC 60079-14 (international)
● EN 60079-14 (EC)
2.1.4
Conformity with European directives
The CE mark on the device is a sign of conformity with the following European directives:
Electromagnetic Compatibility EMC
2004/108/EC
Atmosphère explosible ATEX
94/9/EC
Pressure Equipment Directive PED
97/23/EC
The standards applied can be found in the EC declaration of conformity for the device.
SITRANS P DS III/P410 (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434626-04, 05/2015
Directive of the European Parliament and of the Council on the approximation of the
laws of the Member States relating to electromagnetic compatibility and repealing
Directive 89/336/EEC.
Directive of the European Parliament and the Council on the approximation of the
laws of the Member States concerning equipment and protective systems intended
for use in potentially explosive atmospheres.
Directive of the European Parliament and of the Council on the approximation of the
laws of the Member States concerning pressure equipment.
9
Tabla de contenido
