Commissioning, Operation; Specifications - WIKA TIF11-I Manual De Instrucciones

3. Commissioning, operation / 4. Specifications

3. Commissioning, operation

Do not use field cases with any damage to the exterior!
Repairs are strictly prohibited.
Observe the instructions for mounting and operation as well as the
requirements for the use of the devices in hazardous areas.

4. Specifications

→ For specifications and safety-related characteristics regarding
explosion protection please see operating instructions of the
respective transmitter.
When connecting them to other instruments or components, please refer
to the respective transmitter approval for the connection conditions for
explosion protection, such as maximum admissible voltage, power or
load with capacitances.
With the installation of third-party products and/or transmitters
with bus protocol:
→ see safety-related characteristics for the respective transmitter
For ATEX/IECEx approval:
Third-party transmitter with own, suitable approval possible
4.1 Model TIF11-I
The field transmitter model TIF11-I consists of a case which is suitable
for ignition protection type "intrinsic safety". Within the case, an appropri-
ately certified temperature transmitter can be installed. For specifications
and safety-related characteristics regarding explosion protection, please
refer to the operating instructions of the respective transmitter.
WIKA additional information, models TIF11-I (Ex i), TIF11-F (Ex d)
EN
7