Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Switching off continuous operation:
Press the ON/OFF switch
Switching the laser/working light
on/off
On/off switch:
Press the ON/OFF switch
function is active.
LASER and WORKING LIGHT → WORKING
LIGHT → LASER → SWITCH OFF
Sawdust blowing function
Switching the sawdust blowing function on:
♦
Press the sawdust blower function switch
the rear.
Supporting the extraction function:
♦
Press the sawdust blower function switch
the front.
Maintenance and Cleaning
WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any work.
■
The appliance must always be clean, dry and
free from oil or grease.
■
To clean the casing, use a soft dry cloth.
WARNING!
■
If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or his representative in order to avoid safety
hazards.
■
Replace the saw blade
are blunt and proper sawing is therefore no
longer possible.
■
Clean the appliance after completing your
sawing work.
■
Remove any dirt (e.g. sawdust). If necessary,
clean the saw blade mounting with a brush or
blow it out with compressed air.
PSTD 800 A1
and release it again.
until the required
to
to
as soon as its teeth
Warranty
The warranty provided for this appliance is
3 years from the date of purchase. This appli -
ance has been manufactured with care and
inspected meticulously prior to delivery. Please
retain your receipt as proof of purchase.
In the event of a warranty claim, please contact
your Customer Service by telephone. This is
the only way to guarantee free return of your
goods.
The warranty covers only claims for material and
manufacturing defects, not for transport damage,
worn parts or for damage to fragile components,
e.g. switches or batteries. This appliance is intended
solely for private use and not for commercial
purposes.
The warranty is deemed void if this product has
been subjected to improper or inappropriate han-
dling, abuse or modifi cations that were not carried
out by one of our authorised service centres. Your
statutory rights are not restricted in any way by this
warranty.
The warranty period is not prolonged by repairs
made under the warranty. This also applies to
replaced and repaired parts. Damage and defects
present at the time of purchase must be reported
immediately after unpacking, or no later than two
days after the date of purchase. Repairs made
after expiry of the warranty period are chargeable.
Service
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: [email protected]
IAN 100054
Service Malta
Tel.: 80062230
E-Mail: [email protected]
IAN 100054
Hotline availability:
Monday to Friday 08:00 - 20:00 (CET)
GB
MT
35
Capítulos
Tabla de contenido
