Program Layout; Display; Control Buttons - Bosch Start Line WBE 260 Manual Original

7.

Program layout

7.1

Display

Fig. 14: LED screen
No. Description
1 Left display panel A:
R Distance of rim to WBE 260
R Value of imbalance on 1st balancing plane (inner)
2 Right display panel D:
R Diameter of rim
R Value of imbalance on 2nd balancing plane (out-
er)
3 Display of 1st balancing plane (inner)
4 Display of 2nd balancing plane (outer)
5 Display of balancing function and balancing method
6 Display of set unit
(millimetre or inch)
7 Average display panel B:
R Width of rim
R the static value
R Instructions about the balancing weights
8 Display of set unit
(grams or ounces)
i
After starting WBE 260 the screen displays the
machine code and three display windows show "8.0
5.7 14.0".
Program layout | Start Line WBE 260 | 31
7.2

Control buttons

Fig. 15: Control buttons
No. Name Description
1 A Enter distance of wheel from WBE 260 by hand.
R Arrow upwards, increase value,
R Arrow downwards, reduce value.
2 B Enter rim width manually:
R Arrow upwards, increase value,
R Arrow downwards, reduce value.
3 D Enter rim diameter manually:
R Arrow upwards, increase value,
R Arrow downwards, reduce value.
4 C Calibration/reset button
5 ALU Dynamic imbalance measurement for alloy rims
(optional)
6 T Starting the self test to check the mainboard
(PCB)
7 OPT Starting the optimization process of tires and
rims
8 F Changeover between static / dynamic balancing
9 < 5 g Precision display of imbalance value below 5 g
(0.3 ounces)
10 mm/inch Changeover between millimetres/inches
11 START START button, start of measurement
12 STOP STOP button, stop measurement
!
Only press key by hand. Do not press using sharp
objects.
en
|
1 695 600 539 2016-07-22