Tabla de contenido
Idiomas disponibles
Idiomas disponibles
If all of the conditions above are met, and the Allen® Advance Table still
will not go into the manual flip mode, reset the power: press the On/Off
switch to off and then to on.
The pendant control and manual flip indicators are
flashing
Make sure that the flip handle is fully in the up and locked position or
down and released position. If the indicators continue to flash, reset the
power: press the On/Off switch to off and then to on.
The brakes locked and unlocked indicators are
flashing
Press and hold either the brakes lock or unlock pendant control until the
applicable brakes locked/unlocked indicator on the display stays on; the
indicators are no longer flashing.
The Allen® Advance Table "beeps" when a pendant
control is pressed
A "beep" from the Allen® Advance Table lets you know that the battery
charge level is low or depleted. Plug the Allen® Advance Table into a
power outlet to charge the batteries. To keep the batteries charged, plug the
Allen® Advance Table into an outlet nightly and when you store the
Allen® Advance Table.
Service calls
When you call Allen Medical about your unit, be prepared to give the serial
number from the product identification label. You will find the label on the
inside of the head-end base near the on/off switch.
Preventive maintenance
WARNING:
Only Allen Medical-authorized persons should service the Allen®
Advance Table. Service by unauthorized persons could cause patient
fall, injury, or equipment damage.
We recommend that you do annual preventive maintenance on the Allen®
Advance Table. An effective way to reduce downtime and make sure the
Allen® Advance Table operates correctly is to do preventive maintenance.
The suggested maintenance checks below include specific items for you to
examine.
Allen® Advance Table User Guide (D-720722 Ver D)
Service calls
47
Capítulos
Tabla de contenido
Solución de problemas
