Shut Down The Allen® Advance Table - allen A-71101-EU Manual Del Usuario

Instructions for use
•
Do not press the cervical traction release button while traction
weight is being applied.
NOTE:
The cervical traction bar is an optional accessory that is supplied to
help with the angle of pull for the cervical traction. If used, install the
bar at the applicable location on the H-bracket.
63. After use of the traction weight, remove the weight and the rope from
the assembly.
64. Press the cervical traction release button, and then push the assembly
into the column so that it is in the locked-in position.
Shut down the Allen® Advance Table
65. Level the Allen® Advance Table and the support top "Level the table
and the support top" on page 35.
66. Press and hold the lower control until the Allen®
Advance Table is in its lowest position.
67. Hang the pendant and its cord on
their holders.
68. Turn the Allen® Advance Table off. This
removes all power from the Allen®
Advance Table.
69. Unplug the power cord from the facility
power outlet, and store the power cord on
the Allen® Advance Table.
NOTE:
We recommend that you keep the Allen® Advance Table plugged in
when it is not in use so that the batteries will stay charged. Know and
follow your facility's protocol.
44 Allen® Advance Table User Guide (D-720722 Ver D)