Install The Prone Support Set (A-71300) On The Rail Top - allen A-71101-EU Manual Del Usuario

Instructions for use
NOTE:
To remove a cross pin, align the drop lock with the pin, and hold the
lock in as you remove the cross pin from the H-bracket.
NOTE:
When the H-brackets and cross pins are
not in use, they can be stored on the inside
of the columns.

Install the Prone Support Set (A-71300) on the rail top

The Prone Support Set includes one chest support, six hip supports (two
each of small, medium, and large), two thigh supports, one sling, and one
head plate.
Sling
WARNING:
The sling is intended to provide a support for the patient's legs. We
recommend that you use additional pressure reducing material between
the patient's legs and the sling to help prevent patient injury.
17. Lay the closed part of the sling
over the support top rails.
18. Connect the buckles.
19. Adjust the straps as necessary
for the amount of slack you
want in the sling.
Hip and Thigh Supports
NOTE:
The thigh supports are side specific.
28 Allen® Advance Table User Guide (D-720722 Ver D)