List Of Supplied Components; Receipt And Unpacking - Olimpia splendid SHERPA TOWER S2 E 4 Instrucciones Para La Instalación, Uso Y Mantenimiento

List of main components of the internal unit (Fig.4)
1. Three-way valve
2.
Conditioning circuit circulation pump
3. Safety valve
4. Conditioning circuit expansion vessel
5. Reheating electric heaters collector
6. 3 bar conditioning circuit safety valve
7. Electric heaters safety thermostats
8
Conditioning circuit heat exchanger
9.
Flow switches
10. Conditioning circuit manometer
11. Tester anode

1.3 - LIST OF SUPPLIED COMPONENTS

The appliances are shipped with standard packaging composed of an enclosure and cardboard corners and
a series of expanded polystyrene guards.
Under the packaging of the units is located a 750 x 750 mm pallet which eases transport and displacement
operations.
Inside the packaging, together with the internal unit, the following components are supplied:
• External air sensor kit
• Y-shaped filter
• Wire way for condensation drain

1.4 - RECEIPT AND UNPACKING

The packaging is made up from suitable material and performed by expert personnel.
The units are delivered complete and in perfect condition. However, for he quality control of the transport
services, follow the warnings below:
a. On receipt of the packages, check whether the packaging is damaged. If this is the case, withdraw the
goods with reserve, producing photographic proof and any apparent damage.
b. Unpack, checking the presence of the individual components with the packing lists.
c. Control that all components have not undergone damage during transport. If this is the case, inform the
carrier by registered letter with acknowledgement of receipt within 3 days of receiving the goods, presenting
photographic documentation.
d. Pay attention when unpacking and installing the equipment.
Sharp parts can cause injury. Pay particular attention to the edges of the structure and the fins of
the condenser and evaporator.
No information concerning damage undergone can be taken into consider-
ation after 3 days from delivery.
For any controversy the court of jurisdiction will be BRESCIA.
Keep the packaging for at least the duration of the warranty period, for any shipments to the after-sales
centre for repairs. Dispose of packaging in compliance with the regulations in force regarding waste dis-
posal.
EN - 16
12. Touch screen display
13. Electric panel assembly
14. Cable tie
15. Automatic air vent valves
A. Adjustable support feet
B. DHW reservoir emptying tap
C.
Magnesium anode access cap
D. Tester anode verification button
E. Cable terminal fixing nut
F. Magnesium anode