Description Of Components; Status Led - Urmet IPERCOM 1060/37 Manual Del Usuario

ENGLISH
WARNING! For a functioning of the device it is strictly necessary that the fi rmware version of the Ipercom
system is 2.0.0 or higher. The fi rmware version update of the Ipercom system is available on the Urmet
website in the Download/Software section.
DESCRIPTION
The lift interface Ref. 1060/37 is directly connected to the POE switch and is provided with a matrix with 24
individually controllable relays. It is controlled directly by the Ipercom system server. The relays control the
lift control unit in response to the user's actions. The lift interface enables the lift to reach the desired fl oors
according to certain system events (e.g. door opening following a call to the apartment or self-installation
or passage of key, etc.).

DESCRIPTION OF COMPONENTS

1. Monostable relays
2. Input for common relay contact
3. Emergency alarm input (ALERT)
4. Ipercom LAN port with POE Power Supply
5. Reboot and reset button

6. Status LED

7. RS485 interface terminals (for future implementation)
8. Emergency monostable relè
LED AND BUTTON DESCRIPTION
STATUS LED (6)
LED colour
Green fl ashing
5 fast green fl ashes
Green fi xed
Off
LAN PORT LED (4)
LED colour
Green
Amber
4
1 1 2
1 2
(While rebooting) IP address acquisition
Reset default settings
Device powered and connected
8 7
3 4
Description
Device not powered
Description
LAN connection
Transmission speed
6
5
DS1060-146