8894_95XLDFUwspanish.qxd
5/28/04
ENGLISH
24
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Norelco Razor Cleaner, model RC1776, or
rubbing alcohol) and lubricated with Norelco
Razor Lubricant, model AL80, or one drop of
mineral oil (in the center of the head). This helps
prevent wear of the shaving heads.
After Each Use: Trimmer
1
Turn razor OFF.
Push Trimmer Slide Switch up to pop up
2
Trimmer.
C
Clean Trimmer with the brush every time
3
you use it.
C
4
Lubricate the Trimmer teeth with Norelco
Razor Lubricant (model AL80) or with one
drop of mineral oil every 6 months.
5
Close Trimmer by Sliding Trimmer switch
down.
This razor has no other user-serviceable parts.
Any other service should be performed by an
Authorized Service Location.
10:21 AM
Page 24
ENGLISH
Storage
The Razor can be placed in the charging stand
for safe storage. If storing Razor in stand,
remove the plug from outlet as soon as the
razor is fully charged.
Be sure Razor is turned off. Remove cord
from outlet and Razor or charging stand
before storing in a safe, dry location where it
will not be crushed, banged, or subject to
damage.
Do not wrap cord around Razor or charging
stand when storing.
Store cord in a safe location where it will not
be cut or damaged.
Do not place or store Razor or charging
stand where it can fall or be pulled into a tub
or sink, water or other liquid while plugged in.
Put the Protective Razor Head Cap on Razor
to protect heads.
Assistance
For assistance or the Authorized Norelco
Service Location nearest you, call toll free:
1-800-243-3050
or visit our website: www.norelco.com
Authorized Norelco Service Location
information is available 24 hours a day, 7 days
a week.
25