Cleaning, Care & Maintenance - Polar DB331 Manual De Instrucciones

To use the dispenser
Once the liquid is sufficiently cooled, use the tap
lever for dispensing.
Notes:
• Regularly check the temperature of the product
in the bowl, using a standard thermometer, to
make sure the product is always kept below
the storage temperature.
• NEVER disconnect the machine from the power
supply or switch it off using the on/off switch
when there is still product for consuming
inside the bowl.
• If the appliance is not used continuously, when
used with milk-based products, make sure to:
- spray sanitizer solution around the spigot
area and on the spigot itself (alternatively,
wipe with a clean cloth and sanitizer);
Or
- Dispense a small amount of the product from
the spigot and discard before dispensing the
serving for the customer.
To turn off a certain bowl (for Model
DB332/DB843)
Note: The bowls work
independently. To stop a certain
bowl, you just need to turn it
off.
1. Press the mode button
OFF mode for the desired. The icon
illuminates.
2. Under OFF mode, the bowl will stop stirring
and refrigerating.
DB331_DB332_DB843_ML_A5_v2_20210701.indb 7 DB331_DB332_DB843_ML_A5_v2_20210701.indb 7
To empty the bowl
Note: The bowl must be cleaned and
sanitized at least once a day and more
frequently depending on the products used,
and in any case, in compliance with the
applicable hygiene regulations.
1. Before a bowl is cleaned, it must be emptied.
2. Set the bowl to juice mode. Then release
all the liquid from the bowl into a suitable
container.
3. Switch off and unplug the appliance.
To turn off the appliance
• After use: press the on/off switch
seconds to turn off the appliance.
• In case of freezing, switch off and unplug the
appliance. Then call POLAR agent or qualified
technician.
• Should a fire break out, clear the area
immediately to make way for the trained
personnel for proper handling.
Cleaning, Care &
Maintenance
• Before cleaning or maintenance, ensure to
wear proper personal protections (gloves,
glasses, etc. .
• Do not use abrasive cleaning agents as they
may leave harmful residues.
• DO NOT rinse the base unit. Instead just wipe
the outer surface with a damp cloth.
• Empty and clean the drip trays regularly.
• DO NOT wash any parts in a dishwasher.
• DO NOT dry any parts in a conventional or
microwave oven.
• Ensure to carry out any cleaning and
sanitization with utmost care and on a regular
basis to guarantee the quality of the product
to select the
dispensed and compliance with mandatory
hygiene standards.
• A POLAR agent or qualified technician should
carry out repairs if required.
Warning: Switch off and
disconnect from the power
supply before any cleaning and
maintenance.
UK
for 3
7
2021/7/2 14:39 2021/7/2 14:39