Connecting The Appliance To A Wlan Home Network (Wi-Fi) With Wps Function; Connecting The Appliance To A Wlan Home Network (Wi-Fi) Without Wps Function; Connecting The Appliance To The Home Connect™ App - Thermador T36FT Serie Manual Del Usuario

Connecting appliance to WLAN home network (Wi-Fi)
¡
with WPS function → Page 17
Connecting appliance to WLAN home network (Wi-Fi)
¡
without WPS function → Page 17
The Home Connect™ app will guide you through the en-
tire registration process. Follow the instructions in the
Home Connect™ app to make the settings.
Tips
Please consult the Home Connect™ documents sup-
¡
plied.
Please also note the information in the Home Con-
¡
nect™ app.
Notes
Please also note the safety information in this instruc-
¡
tion manual and ensure that it is also observed when
operating the appliance using the Home Connect™
app.
→ "Safety", Page 4
Operating the appliance on the appliance itself always
¡
takes priority. It is not possible to operate the appliance
using the Home Connect™ app during this time.
10.1 Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function
If your router has a WPS function, you can connect the ap-
pliance to your WLAN home network (Wi-Fi) automatically.
Press .
1.
lights up and the submenu display shows
a
⁠ .
Press / (Submenu) repeatedly until the
2.
submenu display shows
display shows .
Press (Submenu setting).
3.
The submenu display shows an animation for 2 min-
a
utes. The appliance is ready for automatic connection to
the WLAN home network (Wi-Fi).
Activate the WPS function on the router during this pe-
4.
riod.
To do this, take note of the information in the docu-
ments for your router.
If the connection is successful,
a
menu setting display.
If the submenu display shows
5.
able to establish a connection to the WLAN home net-
work (Wi-Fi).
Check whether the appliance is located within the
‒
range of the WLAN home network (Wi-Fi).
→ "Checking the signal strength", Page 18
Repeat the process or connect manually
‒
→ Page 17 .
Connect the appliance to the Home Connect app.
6.
→ Page 17
10.2 Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function
If your router does not have a WPS function, you can con-
nect the appliance to your WLAN home network (Wi-Fi)
manually. The appliance briefly sets up its own WLAN net-
and the submenu setting
flashes in the sub-
, the appliance was un-
work. You can connect a mobile device to the WLAN net-
work and transfer the network information for the WLAN
home network (Wi-Fi) to your appliance.
Requirement: The Home Connect™ app has been in-
stalled on your mobile device.
Press .
1.
lights up and the submenu display shows
a
⁠ .
Press / (Submenu) repeatedly until the
2.
submenu display shows
display shows .
Press (Submenu setting).
3.
The appliance now sets up its own WLAN network with
a
the network name "HomeConnect".
The submenu setting display shows an animation. The
a
appliance is ready for manual connection to the WLAN
home network (Wi-Fi).
Follow the instructions in the Home Connect™ app on
4.
the mobile device.
The network information for the WLAN home network
a
(Wi-Fi) is transferred to the appliance.
If the connection is successful,
a
menu setting display.
If the submenu display shows
5.
able to establish a connection to the WLAN home net-
work (Wi-Fi).
Check whether the appliance is located within the
‒
range of the WLAN home network (Wi-Fi).
→ "Checking the signal strength", Page 18
Repeat the process.
‒
10.3 Connecting the appliance to the
Home Connect™ app
If you have automatically connected your appliance to
your WLAN home network (Wi-Fi), you can connect your
appliance to the Home Connect™ app.
Requirements
The appliance is connected to the WLAN home network
¡
(Wi-Fi). → Page 17
The Home Connect™ app has been installed on your
¡
mobile device.
Press .
1.
lights up and the submenu display shows
a
⁠ .
Press / (Submenu) repeatedly until the
2.
submenu display shows
display shows .
Press (Submenu setting).
3.
The submenu setting display shows an animation.
a
Follow the instructions in the Home Connect™ app until
4.
the process is complete.
If the connection is successful, the submenu setting dis-
a
play shows .
If the submenu setting display shows
5.
was unable to establish a connection to the Home Con-
nect™ app.
In the Home Connect™ app, check whether the mo-
‒
bile device is connected to the WLAN home network
(Wi-Fi).
Repeat the process.
‒
If the submenu setting display shows
6.
Home Connect™ settings. → Page 18
Home Connect™ en-us
and the submenu setting
flashes in the sub-
, the appliance was un-
and the submenu setting
, the appliance
, reset the
17