Installation; Installation Room; Installation Cavity; Installing And Connecting The Appliance - Thermador T18BD Serie Manual De Uso Y Cuidado

Installation

d
WARNING
Do not install the appliance:
- outdoors,
- in an environment with dripping
water,
- in rooms which are at risk of
frost.
The appliance is very heavy for
empty weight see the following
table:
Freezer 18" 255 lbs / 115 kg
Freezer 24" 300 lbs / 135 kg
Freezer 18" 335 lbs / 150 kg

Installation room

The appliance should be installed in
a dry, well ventilated room.
The ambient temperature should not
drop below 55 °F (13 °C) or rise
above 110 °F (43 °C), otherwise
malfunctions may occur.
The installation location should not
be exposed to direct sunlight and
not placed near a heat source, such
as an oven, radiator, etc.
If installation next to a heat source is
unavoidable, use a suitable
insulating plate or observe the
following minimum distances from
the heat source:
- 1.2" (3 cm) from an electric
cooker,
- 12" (30 cm) from an oil or
solid fuel cooker.

Installation cavity

d
It is important to observe the
specified dimensions of the
installation cavity for a trouble free
installation of the appliance and for
the subsequent general view of the
furniture front.
In particular ensure that the cavity is
square. Squareness can be checked
by suitable means, e.g. spirit level,
diagonal measurements, etc.
Furniture/fixtures
The new appliance will be mounted
securely to adjacent and overhead
furniture/fixtures.
For this reason it is essential that all
attachable furniture/fixtures are
connected securely to the base or
the wall by suitable means.
Base
To ensure that the appliance is
installed securely and functions
properly, the base must be flat and
level.
The base must be made of hard,
rigid material.
The installation area must be the
same height as the rest of the room.
On account of the heavy weight of a
fully loaded appliance,
a load bearing base is required.
For the fully loaded weight see the
following table:
- Freezer 18"
- Freezer 24"
- Freezer 24"
If in doubt, contact an architect or
a building expert.
Installing and
connecting the
appliance
d
Have the appliance installed by an
electrician according to the
enclosed installation instructions.
After installing the appliance, wait at
least a half an hour before switching
on the appliance. During transit the
oil in the refrigeration system may
have moved.
Before switching on the appliance
for the first time, clean the inside of
the appliance.
560 lbs / 250 kg
780 lbs / 350 kg
950 lbs / 425 kg
d
CAUTION
7