Basic Operation; Switching On The Appliance; Operating Tips; Switching Off The Appliance - Thermador T36FT Serie Manual Del Usuario

en-us Basic Operation
The ethylene absorber slows down the ripening of ethyl-
ene-sensitive fruit and vegetables to keep them fresher for
longer.
Attaching the ethylene absorber
Attach the ethylene absorber in accordance with the in-
▶
structions for installation and use for the ethylene ab-
sorber.
Using the refill set
Install the components of the refill set in accordance
1.
with the instructions for installation and use for the eth-
ylene absorber.
Replace the bags and the timer every 6 months follow-
2.
ing activation.
Note: Refill sets consisting of bags and timer are available
from our customer service, your dealer or on our website.
Ice scoop
You can use the ice scoop to remove a portion of ice
cubes.
7 Basic Operation

Basic Operation

Basic Operation
7.1 Switching on the appliance
Connect the appliance to the electricity supply.
1.
→ Page 8
Note: If the appliance has been previously switched off
using the control panel, press
The appliance begins to cool.
a
Switch off the warning signal with
2.
goes out as soon as the set temperature
a
has been reached.
Set the required temperature. → Page 14
3.
7.2 Operating tips
Once you have switched on the appliance, the set tem-
¡
perature is only reached after several hours.
Do not put any food in the appliance until the tempera-
ture has been reached.
The front and side panels of the housing heat up occa-
¡
sionally. This prevents condensation from forming.
When you close the door, a vacuum may be created.
¡
The door is then difficult to open again. Wait a moment
until the vacuum is offset.
7.3 Switching off the appliance
Press .
▶
7.4 Setting the temperature unit
You can choose between the temperature setting °F and
°C.
Press .
1.
Press .
2.
Press / (Submenu setting) until the setting
3.
display submenu shows or ⁠ .
Press .
4.
14
7.5 Setting the temperature
Setting the refrigerator compartment temperature
▶
Setting the freezer compartment temperature
▶
7.6 Cool-fresh compartment storage
You can set the temperature and humidity of the cool-
fresh container using predefined storage settings.
Tip: Further settings are available in the Home Con-
nect™ app.
Setting the cool-fresh compartment storage setting
1.
2.
.
3.
.
8 Additional functions

Additional functions

Additional functions
8.1 Super cooling
With Super cooling, the refrigerator compartment cools so
that it as cold as possible.
Switch on Super cooling before placing large quantities of
food in the freezer compartment.
Note: When Super cooling is switched on, increased noise
may occur.
Switching on Super cooling
▶
a
Note: After approximately 6 hours, the appliance switches
to normal operation.
Switching off Super cooling
▶
a
8.2 Super freezing
With Super freezing, the freezer compartment cools so
that it as cold as possible.
Switch on Super freezing 1 to 2 hours before placing food
weighing 4.4 lbs (2 kg) or more into the freezer compart-
ment.
Use Super freezing to accelerate ice cube production.
Press / (Refrigerator compartment) repeat-
edly until the temperature display (refrigerator compart-
ment) shows the required temperature.
The recommended temperature in the refrigerator com-
partment is 37 °F (3 °C).
Press / (Freezer compartment) repeatedly
until the temperature display (freezer compartment)
shows the required temperature.
The recommended temperature in the freezer compart-
ment is 0 °F (−18 °C).
setting
Press any touch field on the control panel (cool-fresh
compartment).
Press and hold
fully.
Press the storage setting that you require.
Press .
lights up.
Press .
The previously set temperature is displayed.
until the light bar lights up