PAPILLON Ranger 25 Manual De Instrucciones página 29

Ranger 25 - 92831
Be sure to round off the front edge to
reduce the chance of kickback or tie-
strap breakage.
Make sure every cutter has the same length and
edge angles as illustrated.

Guide Bar
Reverse the bar occasionally to prevent

partial wear.
The bar rail should always be square. Check

for wear of the bar rail. Apply a ruler to the
bar and the outside of a cutter. If a gap is
observed between them, the rail is normal.
Otherwise, the bar rail is worn. Such a bar
needs to be corrected or replaced.
29