Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Ranger 25 - 92831
3. Installing Guide Bar and saw Chain
A stand saw unit package contains the items as illustrated.
(1) Power unit
(2) Guide bar
(3) Saw chain
(4) Plug wrench
Open the box and install the guide bar and the saw chain on the power unit as follows:
The saw chain haw very sharp edges. Use
thick protective gloves for safety.
1.
Pull the guard towards the front handle to check that the
chain brake is not engaged.
2.
Loosen the nuts and remove the chain cover.
3.
Gear the chain to the sprocket and, while fitting the saw
chain around the guide bar, mount the guide bar to power unit .
Adjust the position of chain tensioner nut on the chain cover to
the lower hole of guide bar.
(1) Hole
(2) Moving direction
(3) Chain tensioner nut
4.
Fit the chain cover to the power unit and fasten the nuts to finger tightness.
21
Tabla de contenido
