Maintenance Of Saw Chain And Guide Bar - PAPILLON Ranger 25 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Ranger 25 - 92831
3.
Oil tank
With a wire hook, take out the oil filter through the
filler port and clean in gasoline. When putting the
filter back into the tank, make sure that it comes
to the front right corner. Also clean off dirt in the
tank.
4.
Spark plug
Clean the electrodes with a wire brush and reset
the gap to 0.65 mm as necessary.

8. Maintenance of Saw Chain and Guide Bar

Saw Chain
It is very important for smooth and safe
operation to always keep the cutters
sharp.
The cutters need to be sharpened when:
Sawdust becomes powder-like.
You need extra force to saw in.
Place the file on the cutter and push straight
The cut path does not go straight.
forward.
Vibration increases.
Keep the file position as illustrated.
Fuel consumption increases.
Cutter setting standards:
Be sure to wear safety gloves.
Before filling:
Make sure the saw chain is held securely.
Make sure the engine is stopped.
Use a round file of proper size for the chain .
Model
Pitch (in.(mm))
Ranger 25
5/32" (4.00)
5.
Sprocket
Check for cracks and for excessive wear
interfering with the chain drive. If the wear is
considerable, replace it with new one. Never fit a
new chain on a worn sprocket, or a worn chain on
a new sprocket.
After each cutter has been filed, check the depth
gauge and file it to the proper level as illustrated.
28
Tabla de contenido
loading

Tabla de contenido