Installing Batteries - HoMedics THERA-P BPW-200 Manual Del Usuario

INSTALLING BATTERIES

1. The battery cover is
located along the right
side of the monitor.
Place thumb on arrow
and remove battery
cover by pressing and
pushing cover in the
direction of the arrow.
2. Install lower battery first
according to the polar-
ity indications inside
the compartment. This
battery should be in
the bottom position
as shown in figure 2.
Battery Type: 2 Alkaline
LR03 (AAA) size
3. Place in the other
battery, according to
the polarity indications
inside the compartment
and as shown in figure 3.
1.
2.
3.
13
4. Replace the cover
by sliding it back
into place.
Replace the batteries if:
1. The weak battery
symbol appears in
the display.
2. Nothing appears in the
display when the power
is switched on.
As the supplied batteries are for test only,
they may be discharged earlier than
batteries you buy in stores. Replace the
batteries in pairs. Remove batteries when
unit is not in use for extended periods
of time.
Note: Batteries are hazardous waste.
Do not dispose of them together with
the household garbage.
4.
14