Operation - Selecta 2000963 Manual De Instrucciones

MANUAL DE INSTRUCCIONES
MAIN SCREEN (START)
Fig 7.1 Screen to set temperature and time.
Fig 7.2 Screen to stop a cycle.
J
.P. SELECTA s.a.u.
CODIGO 80303 REV B Sep2019

7. Operation

All the equipment functions are established through the touch screen. Press gently
with your finger in the center of each icon.
This screen shows the status of the oven before disconnecting it by means of
the main switch (0/I).
This allows the oven to resume its task in the event of a power cut.
7.1 Set temperature and working time
For most applications, this is the usual work method. If you need to create tem-
perature profiles or program the start-up of the oven automatically, follow the
steps in section 7.3.
To select the working temperature:
- From the MAIN SCREEN, click on the value to be modified. The frame of the
modifiable parameter will be boxed in yellow. In the example, the temperature
can be modified.
The + and - keys appear to increase / decrease the value of the adjustment.
- After a few seconds without pressing any key, the yellow frame disappears and
the adjusted value is selected.
- The same operation can be performed to modify the working time or the tem-
perature ramp.
A time of --h --m establishes a continuous operation.
7.2 Start / Stop the cycle
- From the MAIN SCREEN press:
RUN to start the cycle (the icon will change its appearance with the
STOP message).
STOP to stop the cycle (the icon will change its appearance with the
RUN message).
Note: When the duty cycle is in operation, a heat or cold symbol appears
depending on the type of energy that the heating element is generating.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: [email protected] - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 15