Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
Touch screen
Level switch for
liquid detection.
Recirculation
serpentin
Level switch inhibits the thermostat operation
if no liquid level is detected.
Connection with
compressor unit
J
.P. SELECTA s.a.u. - Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
CODE 80324 REV B
Temp.
probe
Circulation
pump
Heater
Safety
thermostat
RS-232
USB
External
temperature
probe
e-mail: [email protected] - website: http://www.jpselecta.es
DEC/2018
(It can be modified without notice)
5. Equipment Description
Immersion thermostats are widely used on laboratories for thermal treatement
of samples, or heating/cooling other equipments.
The equipment includes a circulation pump that can be used to improve the
homogeneity within a bath or to perform a closed liquid circulation circuit for
cooling or heating.
The unit could work in a continuous or timed operation.
6. Installation
Unpack the equipment and visually check that the contents are in good con-
ditions. Keep the package for some days.
6.1 Bucket/Tank
Place the equipment on a flat level stable surface, suitable for the equipment
weight.
To work in a comfortable way, please leave a free space of 50cm around the
equipment and a minimum of 20cm at the rear part.
6.2 Connection to the mains
Plug the equipment to a near socket suitable for the equipment power. Use the
connection cable supplied or a similar one.
For your safety, the equipment must be earthed.
Before plugging the machine, check that the voltage supply and the frequency
corresponds to the one indicated in the equipment characteristics plate.
7. Operation
All the equipment functions are set with the touch screen. Gently press with
your finger in the center of each icon.
When starting the computer, the starting screen will be shown (Fig 7.1).
•
SETTINGS:
-
Time and date: menu to set the date and time.
-
Temperature correction.
-
Temperature alarm limits.
•
PROGRAMMING
-
Allows you to program the temperature evolution profile, by defi-
ning intervals of temperatures & times.
•
TASK
-
Allows you to select and launch the operating temperature, the
working time and the pump flow.
AJUSTES
SETTINGS
TRABAJO
TASK
Fig 7.1 Initial screen
PROGRAMACIÓN
PROGRAMMING
Page: 14
Tabla de contenido
