Measuring Temperature. Atc Correction; Operation; Initial Screen; Setup Screen - Selecta pH-2006 Manual De Instrucciones

Ph-metro digital de sobremesa
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INSTRUCTION MANUAL CODE 80195 REV C
Keep placed the short-circuited stopper
when the electrode is not connected on
the pH-meter.
J
.P. SELECTA s.a.
FEB/2013

6.3 Measuring temperature. ATC correction

The pH-2006 includes ATC (Automatic temperature correction). This means that
the reading is corrected if the measuring temperature is different from 25ºC.
The measuring temperature is the one the temperature probe reads or if the tem-
perature probe is NOT connected it is the temperature set by the keypad.
See 7.2 paragraph to set the measuring temperature by the touch screen:
(Temperature probe NOT connected on the rear panel socket)
Note: If the measuring temperature set has a value far from the actual sample
temperature, the pH reading could have considerable error.

7 Operation

7.1 Initial screen

The initial screen is the pH measuring screen.
As well as the pH more information is done:
System time.
Measuring temperature.
mV
Temperature probe type.
ATC status.
Last Buffers used for calibration.
Buttons: «SETUP», «VIEW», «STD», «SAVE», «PRINT», «DEL»

7.2 SETUP screen

Use this menu to set pH-meter general parameters as:
Current time:
After this line is pointed the "Set current time" window is opened:
Point the item to change: year, month,... (SETUP button
appears)
Point several times over the item to change to set it.
Point «SETUP» to validate the new setting.
Point on the X on the Top - right corner to close the window.
Resolution (mV):
On pointing over this line option, mV resolution is changing
successively.
Resolution (pH):
On pointing over this line option, pH resolution is changing
successively.
Default temperature.
This will be the measuring temperature when no temperature sensor
will be connected.
After this line is pointed, the "Set default temperature" window is
opened:
Point «SETUP» to change de value.
Point «ENTER» to validate.
Temp. electrode
After this line is pointed, a new window is opened. Select the type of
temperature probe connected on the "TEMP" socket.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: www.grupo-selecta.com
(It can be modifi ed without notice)
Tel 34 937 700 877 Fax 34 937 702 362
Page:16
Tabla de contenido
loading

Este manual también es adecuado para:

4120600

Tabla de contenido