Recalling Readings In Memory - Veridian Healthcare 09-349 Manual De Instrucciones

RECALLING AND CLEARING
READINGS
Your Non-Contact Digital Infrared Thermometer
automatically stores the last 10 readings taken. To view
the readings stored in memory, follow these steps:
1. Press the MEASURE button to turn the
thermometer on.
2. Press the Memory button (MEM) to recall the most
recent measurement, Fig. 1.
3. Press the Memory button multiple times to view
previous readings (the unit will beep each time you
switch readings). The index number above the
temperature reading indicates the sequential
number of the stored reading you are currently
viewing.
After 10 measurements have been stored in the
memory, the oldest reading will be automatically
deleted. To clear all records from the memory, hold the
Memory button down until you hear a beep and two
dashes appear on the display, Fig. 2.
Fig. 1
Fig. 2
ENGLISH • 11