Recalling & Clearing Readings - Veridian Healthcare JXB-311 Manual De Instrucciones

RECALLING & CLEARING
READINGS
Your Infrared Thermometer automatically stores
the last 32 readings taken. To view the readings
stored in memory, follow these steps:
1. Press the POWER/SCAN button to turn the
thermometer on.
2. Press the Memory button (marked, "MEM") to
recall the most recent measurement.
3. Press and release the MEM button scroll
through the readings from newest to oldest.
The index number will briefly flash on the
display indicating the sequential number of
the stored reading and the memory icon will
show on the bottom right of the display, Fig 1.
4. The display will indicate the recalled
temperature result and mode method, Fig 2.
After 32 measurements have been stored in the
memory, the oldest reading will be automatically
deleted.
To clear all records from the memory, hold the
MEM button down until the device vibrates and
three dashes appear on the display. The memory
bank is now empty.
12 • ENGLISH
Fig. 1
Fig. 2