Measuring An Object Or Liquid's Temperature - Veridian Healthcare 09-349 Manual De Instrucciones

MEASURING OBJECT/LIQUID
TEMPERATURE
The Non-Contact Digital Infrared Thermometer can
measure objects and liquids from 32°F to 221°F (0°C -
105°C). To measure the temperature of an object or
liquid using your Digital Infrared Thermometer, follow
these steps:
1. Press the Power button
on. All symbols on the display will momentarily
appear, Fig. 1.
2. Ensure that the thermometer is in Object mode; the
Object symbol will be on the display, Fig 2. To
alternate between modes press and release the
Person/Object Mode button until you see the
desired measurement symbol on the display.
3. Press and hold the MEASURE button. The Object
symbol, the Scan in Progress symbol, and "00"
should be displayed, Fig. 3.
4. While holding the MEASURE button, aim the
infrared lens at the object or the surface of the
liquid, holding the thermometer approximately 1.5"
– 2.5" away, Fig. 4.
5. Release the MEASURE button. DO NOT MOVE THE
THERMOMETER; THE MEASUREMENT IS NOT YET
COMPLETE.
6. The thermometer will beep once, and the
temperature reading will be displayed, Fig. 5.
7. After about one minute after use, the thermometer
will automatically beep and shut off.
to turn the thermometer
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
ENGLISH • 9