Recalling And Clearing Measurements - Veridian Healthcare 09-348 Manual De Instrucciones

RECALLING AND CLEARING
READINGS
Your Touch-Free Digital Infrared Thermometer
automatically stores the last 30 readings taken.
To view the readings stored in memory, follow
these steps:
1. Press the MEASURE button to turn the
thermometer on.
2. Press the Memory button (marked, "MEM") to
recall the most recent measurement, Fig. 1.
The unit will beep each time the MEM button
is pushed as the measurements are reviewed.
If the device is in 'Night' mode, the unit will not
emit a beep.
3. Press and release the MEM button scroll
through the readings from newest to oldest.
The index number in the upper left of the
display indicates the sequential number of the
stored reading on the screen, Fig. 2.
After 30 measurements have been stored in the
memory, the oldest reading will be automatically
deleted.
To clear all records from the memory, hold the
MEM button down until you hear a beep and two
dashes appear on the display, Fig 3.
12 • ENGLISH
Fig. 1
Fig. 2
Fig. 3