Measuring Body Temperature - Veridian Healthcare 09-349 Manual De Instrucciones

MEASURING BODY TEMPERATURE

To measure body temperature using your Digital
Infrared Thermometer, follow these steps:
1. Press the Power button
on. The unit will run a self-test and all symbols on
the display will momentarily appear, Fig. 1.
2. Ensure that the thermometer is in Person mode; the
Person symbol will be on the display, Fig 2. To
alternate between modes press and release the
Person/Object Mode button until you see the
desired measurement symbol on the display.
3. Press and hold the MEASURE button. The Person
symbol, Scan in Progress symbol and "00" should be
displayed, Fig. 3.
4. While holding the MEASURE button, aim the
infrared lens at the patient's forehead, holding the
thermometer approximately 1.5" – 2.5" away, Fig. 4.
5. Release the MEASURE button, DO NOT MOVE THE
THERMOMETER; THE MEASUREMENT IS NOT YET
COMPLETE.
6. The thermometer will beep again, and the
temperature reading will be displayed, Fig. 5. If the
temperature measurement is below 100.4° F, a
happy face will be appear next to the reading. If the
reading is 100.4° F or above, a sad face will be
displayed.
7. After about one minute after use, the thermometer
will automatically beep and shut off.
8 • ENGLISH
to turn the thermometer
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5