Recalling & Clearing Memory - Veridian Healthcare 09-349 Manual De Instrucciones

RECALLING & CLEARING
READINGS
Your Infrared Thermometer automatically stores
the last 10 readings taken. To view the readings
stored in memory, follow these steps:
Press the MEASURE button to turn the
1.
thermometer on.
2. Press the Memory button (marked, "MEM")
to recall the most recent measurement,
Fig. 1.
Press and release the MEM button to scroll
3.
through the readings in memory.
4. The index number above the temperature
reading indicates the sequential number
of the stored reading you are currently
viewing. The Person/Object icon will
indicate what mode the temperature
was taken in. For example, the device
may show reading 1 was a 'person'
measurement, while reading 2 was an
object measurement.
5. After 10 measurements have been stored
in the memory, the oldest reading will be
automatically deleted.
6. To clear all records from the memory, hold
the MEM button down until you hear a
beep and two dashes appear on the display,
Fig. 2.
Fig. 1
Fig. 2
ENGLISH • 13