Working Advice; Maintenance And Service; Maintenance And Cleaning - Bosch Universal Level 2 Manual Original

regard to the reference points to avoid errors arising from a change in the measuring
tool's position.
Working with the incline function
Select cross-line mode with incline function.
For work with the incline function, automatic levelling is switched off. You can hold the
measuring tool freely in your hand or place it on a sloping surface. This means that the
laser beams are no longer levelled and no longer necessarily run perpendicular to one an-
other.

Working Advice

Only the centre of the laser point or laser line must be used for marking. The size
u
of the laser point/the width of the laser line changes depending on the distance.
Working with the Tripod (Accessory)
A tripod offers a stable, height-adjustable support surface for measuring. Place the
measuring tool with the 1/4" tripod mount (10) on the thread of the tripod (11) or a con-
ventional camera tripod. Tighten the measuring tool using the locking screw of the tri-
pod.
Roughly align the tripod before switching on the measuring tool.
Laser Goggles (Accessory)
The laser goggles filter out ambient light. This makes the light of the laser appear brighter
to the eye.
Do not use the laser goggles as protective goggles. The laser goggles make the
u
laser beam easier to see; they do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while driving. The laser goggles do
u
not provide full UV protection and impair your ability to see colours.
Example applications (see figures D–F)
Examples of possible applications for the measuring tool can be found on the graphics
pages.

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.
Bosch Power Tools
English | 19
1 609 92A 5DV | (05.12.2019)