Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Installation
INTERNAL BLOWER
IMPORTANT NOTE: The blower must be installed and
plugged in prior to making the electrical connection to the
hood.
For models with a bottom panel, the panel must be
removed prior to installing the blower. Refer to the illustra-
tion below.
Remove the filters.
1
2
For model VW30S, remove the screw cover and screw
to remove the spacer. Refer to the illustration below.
3
Insert the three-prong plug from the blower wire into
the hood receptacle. Refer to the illustration.
Insert the blower by aligning the round discharge on
4
the blower with the discharge on the hood.
Insert the plug from the blower wire into the receptacle
5
on the blower. Refer to the illustration.
6
Secure the blower to the hood using the two mounting
screws provided.
7
For model VW30S, install the spacer, screw, and cover.
TAB
Bottom panel removal
8 | Wolf Customer Care 800.222.7820
SPACER
Spacer removal (model VW30S)
RECEPTACLE
Hood receptacle
MOUNTING
RECEPTACLE
SCREW
Mount blower
Tabla de contenido
