Common Interface (Ci); Connecting The Power Supply - Medion LIFE E13282 Guía Rápida

You also have the option of connecting a digital satellite system to the socket la-
belled LNB IN.
 Screw a coaxial antenna cable's F connector onto the connector on the LCD TV.
If you want to watch encrypted channels, or subscription channels, you
must use a suitable card. Insert a CAM module (available in specialist
shops) in the slot provided for this purpose on the left-hand side of the
device (COMMON INTERFACE). You can then insert your provider's card
in the CAM module.

3.5. Common Interface (CI)

If you want to watch subscription channels, you must first register with the relevant
provider. You will receive a Conditional Access Module (CAM module) and a special
card from your provider after registration. You will find information about the set-
tings in the documentation supplied with the module.
Install the CI components on your television in the following way:
 First insert the CAM module in the slot on the side of the LCD TV. Then insert the
card.
 Connect the television to the power supply, switch it on, and wait for a moment
until the card is recognised.
Please note that you can only insert or remove the CI module when the
device is in STANDBY mode, or has been disconnected from the mains
power.
The CAM module must be inserted correctly: it cannot be inserted if it is
the wrong way round. The CAM module or the television could be dam-
aged if you attempt to insert the CAM module by force.

3.6. Connecting the power supply

 Connect the mains plug on the device to an easily accessible 100 - 240 V ~ 50 Hz
mains socket.
12