FIC K8M-800T/M Manual página 56

K8M-800T/M Mainboard Manual
Installing Cards
1. Select an available card slot.
2. Remove the slot cover from
chassis.
3. Push the card firmly into the slot. Secure the card with the screw.
Connecting ATX Power
The 20-hole power plug is connected
to ATX power connector. The 4-hole
Power plug is on ATX_12V power
connector.
Assembly System Case
Place the cover on the chassis and
secure the screws on the cover (as
arrow heads pointed) either by a
screw driver or by fingers to tighten
them up.
6