Connect Devices; Floppy Diskette Drive Connector; Ide Device Connectors - FIC K8M-800T/M Manual

K8M-800T/M Mainboard Manual

5). Connect Devices

Floppy Diskette Drive Connector

This connector provides the connection with your floppy disk drive.
Insert the floppy ribbon cab le (below)
onto th e floppy con nector.
The colored stripe (indicated by the
arrow, right) of th e ribbon cable must
be on the same side as Pin 1.

IDE Device Connectors

The two connectors, PRIMARY
and SECONDARY , are u sed for
your IDE hard disk drives, CD drives,
LS-120|drives, or IDE ZIP drives.
Insert the floppy ribbon cab le (below)
onto th e floppy con nector.
The colored stripe (indicated by the
arrow, right) of th e ribbon cable must
be on the same side as Pin 1.
2 - 8