FIC K8M-800T/M Manual página 55

Quick Reference
4. Connect the IDE ribbon cable and power wires. The colored line on
the cable (pointed by blue arrowhead) must be the same side with the
pin1 of the connector.
Connecting Hard Drive
1. Locate hard drive frame and storage on the chassis.
2. Place the hard disk drive from the rear of the
frame as the arroaw head indciated.
3. Affix the drive on the frame by screws.
4. Connect the IDE ribbon cable and power wires. The colored line on
the cable (pointed by blue arrowhead) must be the same side with the
pin1 of the connector.
5