Connecting Devices - FIC K8M-800T/M Manual

K8M-800T/M Mainboard Manual

Connecting Devices

1. Locate floppy drive frame and storage on the chassis.
2. Place the drive from the front panel side into
the frame.
3. Affix the drive on the frame by screws.
3. Connect the floppy ribbon cable and power wires. The colored line
on the ribbon cable (pointed by blue arrowhead) must be the same side
with the pin1 of the connector.
Connecting CD/DVD Drive
1. Locate CD/DVD drive frame and storage on the chassis.
2. Place the drive from the front panel side into
the frame.
3. Affix the drive on the frame by screws.
4