Hardware Installation - FIC K8M-800T/M Manual

K8M-800T/M Mainboard Manual

Hardware Installation

CPU
1. Swing the lever upword to 90 degree.
2. Install the CPU and make sure the the pin 1
orientation by aligning the socket corner marking
with the socket corner closest to the lever tip. Do
not insert the CPU by force.
Apply some thermal materials on the CPU top;
and install a fan with heatsink that approved by
CPU manufacturer. Affix the CPU by pressing
the lever downward and locking it.
3. Place the fan with heatsink on the CPU top
and press down two plastic clips to hook up with
the holes on the retention module on two sides.
4. Press down the white bar on each clip to
fasten the fan set on the retention module.
2