Protección Del Medio Ambiente - Skil 7351 Instrucciones De Funcionamiento Y Seguridad

Costa Rica
Cofersa ......................................................(506) 2205-25-25
Cuba
Grupo Joan Bolufer S.L. . ................................. (53) 270 3820
Ecuador
Tecnova ..................................................... (59) 34 2200 500
El Salvador
Heacsa ....................................................... (203) 2221 9000
Guatemala
Edisa . ......................................................... (502) 2 234 4063
Honduras
Chips .......................................................Tel (504) 556 9781
México
Robert Bosch S.A. de C.V.
Tel. Interior: +52 (01) 800 627 1286
Tel. D.F.: +52 (01) 52 84 30 62
E-Mail: [email protected]
Nicarágua
Madinisa ..................................... (505) 249 8152 / 249 8153
Panamá
Zentrum ........................................................ (507) 229 2800
Paraguai
Chispa ........................................................ (595) 2155 3315
Peru
Autorex ....................................... (511) 706 1100 / 706 1143
Republica Dominicana
Jocasa ...................................... (1809) 372 6000 / 530 2720
Uruguay
Epicentro ................................................... (59) 82 200 6225
Venezuela
Robert Bosch
Venezuela ............................... (58) 212 207 4511/ 207 4420
PROTECCIÓN DEL MEDIO AMBIENTE
Las herramientas y accessorios
inservibles, deberán ser sometidas a un
reciclaje ecológico.
En los casos que quieras descartar su
herramientas y accessorios, no tirar en la
basura. Pedimos que entregue a un servicio
técnico autorizado Skil de herramientas
eléctricas que dará el destino correcto, según las reglas de
preservación del medio ambiente, haciendo la reciclaje
correcta de las partes, cumpliendo así con las leyes locales.
Reservado el derecho de modificaciones
SKIL_IB7351_BR.indd 12
Oribital sander
INTRODUCTION
• This tool is intended for dry sanding and f nishing of wood,
painted surfaces, plastic and filler
• Read and save this instruction manual 3
TECHNICAL SPECIFICATIONS 1
TOOL ELEMENTS 2
A On/off switch
B Micro-filter
C Vacuum cleaner adapter
D Pressure Control
E Variable speed
F Ventilation slots
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
Warning: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all warnings
and instructions for future reference. The term "power tool"
in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
12
7351
26-4-2011 10:22:47