Tabla de contenido
Código
de fallo y
PID(P)
luz de
SID(S)
adver-
FMI
tencia
146
P110
YELLOW
0
151
P110
RED
0
153
P105
YELLOW
3
154
P105
YELLOW
4
155
P105
RED
0
P050
191
11
234
P190
RED
0
235
P111
MAINT.
1
241
P084
YELLOW
2
242
P084
YELLOW
10
243
P121
NONE
4
245
S033
NONE
4
D 86
SPN
Causa
(S)
FMI
Coolant temperature signal
110
indicates coolant temperature
0
has exceeded the minimum
engine protection limit.
Coolant temperature signal
110
indicates coolant temperature
0
has exceeded the maximum
engine protection limit.
High voltage detected at intake
105
manifold temperature signal pin
3
34 of the engine harness.
Low voltage detected at intake
105
manifold temperature signal pin
4
34 of the engine harness.
Intake manifold temperature
signal indicates intake manifold
105
temperature is above the
0
maximum engine protection
limit.
A/C Clutch drive signal indicates
876
a short to ground when
11
commanded on.
Engine speed signal indicates
190
engine speed has exceeded the
0
overspeed limit.
Coolant level signal at pin 37 of
111
the engine harness indicates
1
coolant level is low.
Vehicle speed signal on pins 8
and 18 of the OEM harness has
084
been lost.
2
Invalid or inappropriate vehicle
speed signal indicated on pins 8
084
and 18 of the OEM harness
10
indicating connection or possible
tampering.
Error detected in the exhaust
513
brake relay enable control circuit
4
at pin 42 of the engine harness.
Error detected in the fan clutch
647
relay enable circuit at pin 31 of
4
the engine harness.
Efectos
Power derate and possible engine
shutdown if engine protection
shutdown feature is enabled.
Speed derate and possible engine
shutdown if engine protection
shutdown feature is enabled.
Default value used for intake
manifold temperature.
No engine protection for intake
manifold temperature.
Default value used for intake
manifold temperature.
No engine protection for intake
manifold temperature.
Speed derate and possible engine
shutdown if engine protection
shutdown feature is enabled.
Can not turn on A/C.
Fuel to injectors disabled until
engine speed falls below the
overspeed limit.
Power derate and possible engine
shutdown if engine shutdown
feature is enabled.
Engine speed limited to "Max.
Engine Speed without VSS". Cruise
control, gear-down protection and
the road speed governor will not
work. Trip information data that is
based on mileage will be incorrect.
Engine speed limited to "Max.
Engine Speed without VSS". Cruise
control, gear-down protection and
the road speed governor will not
work. Trip information data that is
based on mileage will be incorrect.
Exhaust brake will not work.
Electronic control module (ECM)
can not control the engine cooling
fan. Fan will remain on or off.
Tabla de contenido
