PNI House WiFi550 NVR Manual De Usuario página 8

EN
SYSTEM CONTROL THROUGH MOBILE APPLICATION "DANALE"
1. Download the "Danale" app by accessing the AppStore or Google Play or scanning the codes below:
2. Create an account in the application or log in directly if you already have one.
3. Ensure that the NVR is connected to the Internet and that the NVR's IP address is correct.
4. Connect the NVR to your router via cable.
5. In the NVR menu in the [WireNet] section, check the DHCP option to get the IP address automatically or
add the network parameters manually.
Enable P2P. In the main NVR interface, go to [System Setup] → [Network] → [Mobile]. Click "Enable"
6.
and "Refresh" until the status becomes "Online". If after 5 minutes the status is still "Not online" then it is a
problem with setting the network parameters. Ensure that the NVR is connected to the Internet.
Adding the device in the app.
7.
• Push "+" button
a. Add NVR through network search. Choose the WiFi network you want to connect to. Enter your network
password. The application will look for the connected systems in the network
Note: Your mobile phone and NVR must be connected to the same router.
b. Add NVR manually. Click
Note: Device ID can be found by accessing the main interface of the NVR- [System setup] → [Network] →
[Mobile].
Scan the QR Code - Device ID.
8