Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
NVR MENU
Connect the NVR to a monitor via the HDMI or VGA cable.
Authentication data:
Username: Admin
Password: 1234
ADD IP CAMERA
1.
Right-click in the NVR's main interface and select [IP Camera]
2.
If you add a single camera, connect the camera and the NVR via an
Ethernet cable. If you add more cameras, connect the cameras to a
switch, then connect the switch to the NVR
3.
Click [Match Code]. The system will pair the camera with the NVR.
4.
Click [Search], then [Add All]
Note: The cameras in this kit are paired with the NVR from the factory.
REPEATER FUNCTION
With this feature, the NVR has a higher wireless signal transmission distance. Thus, IP cameras located in
remote areas can connect to another IP camera and thus connect to the NVR.
1.
Right-click in the main interface and select [IP Camera]
2.
Click [Repeater]
3.
Click "+" to establish the connection between 2 cameras
The picture below shows three models for connecting the cameras:
•
One by one: CH3 → CH2 → CH1 → NVR
•
Two to one: CH5 si CH6 → CH4 → NVR
•
Directly to NVR: CH7 → NVR, CH8 → NVR
4
Tabla de contenido
