Memory Functions; Recalling Measurements In Memory - Veridian Healthcare 01-508 Serie Manual De Instrucciones

MEMORY FUNCTIONS

Recalling Measurements in Memory

Select the desired user to review, 1 or 2
The user icon displayed represents the memory bank
where the measurement result will be stored. When the
monitor is OFF, press and release the SET button to toggle
between user 1 or 2.
This monitor stores and recalls up to 60 readings in per user.
These measurements can be shared with your physician or
trained healthcare professional.
Press and release the MEM button. The unit will rst
1.
display the average of the last three measurements, Fig 1.
Press the MEM button again to begin scrolling through the
2.
saved measurements. Measurements will appear on the
display from most current to oldest; the memory number
will appear on the lower left corner.
3. All results for a given measurement will display, including
measurement results, pulse rate, Hypertension Indicator
and Irregular Heartbeat alert (if applicable). The date/time
stamp will cycle on the lower left—memory number, time,
date, repeat, Fig 2.
4. When the number of readings exceeds 60 , the oldest data
will be replaced with the new record.
Press START/STOP to turn the monitor o at any time
5.
during review of the stored measurements.
.
Fig. 1
Fig. 2
ENGLISH • 17