Environmental
Operating temperature: 5°C to 40°C
conditions
Operating humidity: 15% to 95% non-condensing
Storage and transport temperature: -20°C to +60°C
Storage and transport humidity: up to 95% non-condensing
Gross
Mask fully assembled with elbow assembly (no headgear)
dimensions
154 mm (H) x 159 mm (W) x 147 mm (D)
International Commission on Non-Ionizing Radiation Protection (ICNIRP)
Magnets used in this mask are within ICNIRP guidelines for general public use.
Service life
The service life of the F20 mask system is dependent on the intensity of usage,
maintenance, and environmental conditions to which the mask is used or stored. As
this mask system and its components are modular in nature, it is recommended
that the user maintain and inspect it on a regular basis, and replace the mask
system or any components if deemed necessary or according to the 'visual criteria
for product inspection' in the 'Cleaning your mask at home' section of this guide.
Refer to the 'Mask components' section of this guide for information of how to
order replacement parts.
Mask setting options
For AirSense, AirCurve or S9: Select 'Full Face'.
For other devices: Select 'MIR FULL' (if available), otherwise
select 'FULL FACE' as the mask option.
Notes: The manufacturer reserves the right to change these
specifications without notice.
Storage
Ensure that the mask is thoroughly clean and dry before
storing it for any length of time. Store the mask in a dry place
out of direct sunlight.
Disposal
This mask and packaging does not contain any hazardous
substances and may be disposed of with your normal
household refuse.
Symbols
The following symbols may appear on your product or
packaging:
Importer
Size - small
Size - large
Indicates a Warning or Caution and alerts you to a possible injury or
explains special measures for the safe and effective use of the device
Caution, consult accompanying documents
Do not use if package
damaged
7
Not made with natural
rubber latex
Size - medium
Medical device
Single patient reuse