Cleaning; After Each Use; Drying & Storing; Sanitize Daily - Medela symphony & lactina Manual De Instrucciones

Ocultar thumbs Ver también para symphony & lactina:
Tabla de contenido

2. Cleaning

Caution
• Only use drinking-quality water for cleaning.
• Separate and wash all parts that come in contact with the breast and
breastmilk immediately after use to avoid accumulation of breastmilk
residue and to prevent growth of bacteria.
• Do not store wet or damp parts as mold may develop.
• If mold develops in tubing, discontinue use and replace tubing.
Contact Medela Customer Service at
[email protected] or 1-800-435-8316.

2.1 After Each Use

1 Before cleaning, disassemble kit by
following instructions in section 1.5.
Rinse all separated parts that came in
contact with breast and breastmilk in
cool water in order to remove breastmilk
residue.
Washing in sink:
2
• Soak all separated parts
in warm soapy water for
5 minutes.
• Clean with a clean dish-
cloth or soft brush.
• Rinse all separated
parts with clear water.
• Allow all parts to air dry
in a clean area.
• Store dry parts when
not in use.
12
or
Washing in dishwasher:
• Wash all separated parts
on top rack of dishwasher.
• Allow all breastpump parts
to air dry in a clean area.
• Store dry parts when not
in use.
2.2 Drying & Storing
Allow all breastpump kit parts to air dry in a clean area and store dry
parts when not in use. Do NOT store wet or damp parts.
Note
• Wash breastpump kit parts after each use�
• Sanitize breastpump kit parts once daily�
• Take care not to damage parts of the pump kit during cleaning�

2.3 Sanitize Daily

Wash hands thoroughly.
Options for sanitizing:
Quick Clean Micro-Steam Bag:
You may sanitize your kit parts by following the instructions on
Medela's Quick Clean™ Micro-Steam™ bag.
Do NOT Micro-Steam the Lactina
Boiling:
Separate all parts that come in contact with your breast and breastmilk.
• Fill a pot with enough water to cover all parts.
• Bring water to a boil.
• Place parts in boiling water for 10 minutes.
• Allow water to cool and gently remove parts from water with tongs.
• Place parts on a clean surface and/or towel.
• Allow all parts to air dry.
• Store dry parts when not in use. Do NOT store wet or damp parts.
Note
• Visit www�medela�com for addtional cleaning products�
piston and cylinder.
®
13
Tabla de contenido
loading

Tabla de contenido