Tabla de contenido
1. Assembly & Use (cont.)
1.4 Manual Breastpumping
Start by following instructions 1-8 from Lactina Pump Kit Assembly,
then proceed with step 10 below.
10 Screw cylinder
11 Center breastshield
into back of
breastshield.
12 When your pumping session is over, store your breastmilk
and go to the section 2 for cleaning instructions.
10
over your nipple and
start pumping by
pushing and pulling
on end of piston.
1.5 How do I disassemble my kit?
1 Finish pumping.
While the pump
is still running,
disconnect tubing from
breastshields.
2 Remove collection
container and store
breastmilk.
3 Disassemble.
All parts that come in contact with
your breast and breastmilk must
be disassembled and washed
for the kit and pump to function
efficiently.
b Twist and pull the
yellow valves off the
breastshields.
(Let pump run for 2 minutes
with tubing attached. This will
eliminate condensation that
naturally results from humidity.)
a Separate breastshields.
c Remove the white
membranes from
the valves.
11
Tabla de contenido
