Hamilton Beach FlexBrew 49949 Manual Del Usuario página 5

How to Brew a Single-Serve Pod
w WARNING Burn Hazard.
If overflow occurs, unplug and allow coffee maker to cool.
To avoid hot coffee overflowing:
• Fill Water Reservoir with cup or travel mug of water into which
coffee will be brewed.
• Fully insert cup or travel mug on Drip Tray.
• Do not lift Lid during brewing process.
• If brew process is stopped early, water must be drained from unit.
Place a large mug on Drip Tray/Cup Rest. Press and hold BREW
REG or BREW BOLD button. Failure to drain unit can cause next cup
brewed to overflow.
w CAUTION Cut Hazard.
Removable single-serve pod holder has a sharp needle. Piercing
needle on underside of lid also is sharp. Use caution when handling.
NOTES:
• Use only cold water in Reservoir. Do not use hot water.
• Do not reheat coffee in machine.
• Do not use creamer or nondairy creamer in Reservoir.
• After brewing hot cocoa single-serve pods, brew a water-only cycle
without a single-serve pod to avoid possibility of clogging piercing
needle.
• Coffee Maker brews all water added.
• Press BREW REG or BREW BOLD button again to STOP brewing
midcycle. Remaining water must be removed. See warning
statement above.
• If Brew Indicator Light flashes three times, Lid is not closed. Lower
Lid until it clicks to lock. Press BREW REG or BREW BOLD button.
• Do not brew coffee without Removable Needle Holder locked into
place.
1. Plug into outlet.
2. Lift Lid Latch until Lid clicks into place.
Insert Funnel in opening.
3. Place Gray Removable Single-Serve Pod
Holder in Funnel, aligning Handle with
Funnel Handle.
4. Place a pod into Single-Serve Pod
Holder. Do not remove foil.
5. Close Lid and snap in place to pierce
single-serve pod.
6. Lift Water Reservoir Lid.
7. Fill cup or travel mug into which coffee
will be brewed, and add that water to
Water Reservoir. 14 oz. (414 ml) of water
is MAX amount for single-serve pods.
8. Close Lid.
9. Use Cup Rest for a cup or mug and
remove Cup Rest for a travel mug.
10. Press BREW REG or BREW BOLD button
to start brewing. The Brew Indicator
Light will light up to show that Coffee
Maker is brewing. The Coffee Maker will
shut off automatically when brewing is
complete.
11. To stop cycle early, press BREW REG or
BREW BOLD button to turn off. If brew
process is stopped early, water must be
drained from Coffee Maker. Place a large
mug on Drip Tray/Cup Rest. Press and
hold BREW REG or BREW BOLD button.
Failure to drain Coffee Maker can cause
next cup brewed to overflow. Unplug.
12. Funnel and Single-Serve Pod Holder
should be rinsed after every use.
2 3
4
7
9
5