Black and Decker RCD628B Manual De Uso Y Cuidado página 25

PASTA FUNCTION
1 . Place desired amount of water inside inner pot . Avoid adding more water
than 10 cup water level to prevent spillage .
2 . Set inner pot into unit . Make sure inner pot sits directly in contact with
heating plate by turning it slightly from right to left until seated properly .
Cover with lid to boil faster .
3 . Plug unit into appropriate electrical outlet .
4 . Encendido/Apagado Light will start blinking .
5 . Press Pasta Button and then press Encendido/Apagado Button to
start boiling water . Both Pasta and Encendido/Apagado Button Lights
will be solid, indicating selected function has started .
6 . Once unit signal sounds, lift and remove lid carefully to avoid scalding
and allow water to drip into inner pot . Add pasta to boiling water . Unit will
cook pasta for 10 minutes . Do not cover with lid . To stir pasta, use paddle
or another long, handheld utensil .
7 . Once it finishes, unit signal will sound, indicating that pasta is ready . It will
automatically turn off, going back into the standby mode with the
lights blinking . For softer pasta, keep pasta in hot water for a little longer .
Filled pasta, like ravioli, may also need to be cooked for a longer
period . Fresh pasta may need to be cooked for a shorter period .
NOTE: You can use the Steam Tray as a strainer to drain the water .
NOTE: You can interrupt at any time by pressing Encendido/Apagado
Button . Unit will go back into standby mode with the Encendido/Apagado
Button light blinking . Allow appliance to cool completely before cleaning .
Disconnect plug from wall outlet when not in use .
STEAM COOKING FUNCTION
1 . Place desired amount of water inside inner pot between the 4 and
8 cups water level .
2 . Place foods to be steamed on steam tray .
3 . Set inner pot into unit . Make sure inner pot sits directly in contact with
heating plate by turning it slightly from right to left until seated properly .
Cover with lid .
WHEN USING AUTOMATIC STEAM COOKING MODE, DO NOT OPERATE
UNIT UNCOVERED . STEAM IS GENERATED DURING USE .
4 . Plug unit into appropriate electrical outlet .
5 . Lights will start blinking .
6 . Press Steam Cooking (Vapor) Button and then press Encendido/Apagado
Button to start steam cooking process . Both Steam Cooking and Start
Stop Button Lights will be solid indicating selected function has started .
Place the steam tray on the inner pot when you hear the first signal . This
signal indicates that the steam has started .
NOTE: If you wish to turn foods inside steam tray, lift and remove lid carefully
to avoid scalding and allow water to drip into steam tray . Use paddle or
another long, handheld utensil to scoop and mix foods . When done, cover
steam tray with lid . Use protection for your hands to avoid direct contact with
steam being released by unit .
7 . Unit will signal every 15 minutes and turn off at one hour . It will then signal
and go back into standby mode with the lights blinking .
RCD628-UC-Revision B.indd 25
25
10/23/19 10:41 AM