ASSEMBLY
THREADLESS
FRONT/REAR
RETENTION TIPS
FRONT/REAR
HUBS
RETENTION WASHER
Not all axles can carry foot plates. Consult our local Distributor service if you want to clarify any doubt.
Some BMX bikes come with two or four foot plates. If your bike is a Dirt Jump bike you may receive only
two foot plates. These are designed for one side only. The Freestyle bikes may come with four foot plates,
two for each wheel. Dirt Jump bikes usually do not come with foot plates.
TRAINING WHEELS
There are two different braces used to attach the training wheels to the bicycle. Determine which brace
was included with your bicycle and follow the given instructions for that particular brace.
OPTION 1 - First tighten the training wheels to the wheel support. Place a washer on the rebound bolt.
Then, insert the rebound bolt trough the wheel. Place another flat washer and screw a hexagonal nut on
the rebound bolt. Insert the rebound bolt through the wheel support and place a washer on the rebound
bolt. Repeat the procedure for the other wheel.
OPTION 2 - First tighten the training wheels to the wheel support. Insert the rebound bolt trough the
wheel. Then place a fat washer. Insert the rebound bolt through the wheel support and place a washer on
the rebound bolt. Tighten the training wheel in place by screwing another hexagonal nut on the rebound
bolt. Repeat the procedure for the other wheel.
It is very important to check the training wheel connection to the bicycle. Failure to properly tighten may
cause the training wheel to dislodge. Please contact the local distributor with any questions.
OPTION 1
WHEEL SUPPORT
TRAINING WHEEL
WASHER
REBOUND
BOLT
ATTACHING TRAINING WHEEL BRACE TO BICYCLE
There are two different braces used to attach the training wheels to the bicycle: the c-shape brace and
the flat brace. Determine which brace was included with your bicycle and follow the given instructions
for that particular brace.
All manuals and user guides at all-guides.com
RETENTION
WASHER
AXEL NUTS
WASHER
PROGRESSIVE
HEXAGONAL
NUT
WASHER
THREADED
FRONT/REAR
RETENTION TIPS
FRONT/REAR
HUBS
OPTION 2
WHEEL SUPPORT
TRAINING WHEEL
REBOUND
BOLT
RETENTION
WASHER
AXEL NUTS
PROGRESSIVE
RETENTION WASHER
HEXAGONAL
NUT
WASHER
37
www.bergcycles.com