26
Engine Rieju
2.5 ENGINE REASSEMBLY
1) PLACE the clutch crankcase (right hand side) on a flat surface. Then, fit the spring and
the gear selection poppet ball in their seats and apply grease to prevent them falling out.
2) PREPARE the transmission assembly (primary/secondary) keeping all components to-
gether (F-36). Put a 0.6 mm shim washer under the 1
the 3
and 4
primary gear (F-36).
rd
th
LOWER the assembly thus formed into its seats (F-37).
Raise the 5
speed gear on the secondary shaft and insert the fork (F-38).
th
Fit the other fork (6
speed gear) into its seat (F-39).
th
speed gear and position the fork in
st
F-36
F-38
Engine
F-37
F-39