RIEJU MRX-SMX 50 Manual De Taller Chasis página 57

4
Electric system
• Pressing the button "TRIP" for 3 seconds, we will pass to the next screen of the Display
where the word "PULSE" will appear, following the sequence pressing the button "TRIP",
we will insert the value corresponding to the pulses of the sensor of the wheel.
• Going on pressing the button "TRIP", the option "MILES", (mph) and kilometres hour
(km / h) will be displayed and with the button "TRIP" we will choose km/h.
• Keeping it pressed for 3 seconds, the word "PULSE" will appear on the screen and
above it in the right part of the screen RPM will be displayed, then we will insert the value
corresponding to the RPM, picking the fixed value pressing the button "TRIP".
Keeping the button "TRIP" pressed for 3 seconds more, we will turn back to the INITIAL
screen.
The return to the initial screen becomes effective Automatically after 6 seconds without
operating the button "TRIP."
TO CHECK IF THE INPUT DATA IS THE RIGHT ONE, WE SHOULD TURN ON THE
IGNITION, START THE ENGINE AND IN TWO SECONDS THE ENTERED DATA WILL
BE DISPLAYED ON THE SCREEN DURING TWO SECONDS, VERIFYING THAT IT IS
CORRECT, IMMEDIATELY AFTER THE INITIAL SCREEN WILL APPEAR.
The dashboard is ready to be used giving the right information.
MAE DASHBOARD
SET OF VALUES
VALUES TO BE INSERTED IN THE DISPLAY CONFIGURATION
Rear Tyre
Development of the wheel
Pulses of the Sensor (screws)
Pulses of RPM
MRX 50cc. SMX 50cc.
110/80-18 130/70-17
1912 1970
3 3
3 3
Chassis